- Weighing Range: 0 ~ 1 kg.
- Rated Output: 1.0 ± 0.1mV / V.
- Non Linear Output: ± 0.03% F.S.
- Input Impedance: 1066 ± 10% Ω.
- Output Impedance: 1000 ± 10% Ω.
- Insulation Resistance: 2000 MΩ.
This load cell sensor (sometimes called a strain gauge) can convert up to 1 kg of pressure (force) into an electrical signal. Each load cell can measure the electrical resistance that changes depending on the strain (pressure, force, etc.) applied to the rod.
Whether you need to use this gauge to detect the presence of an object by measuring the weight of the object, whether the weight of the object has changed over time, or the strain or stress applied to the surface. Can be determined. This straight bar load cell is made of aluminum alloy and can read 1kg capacity
weight
This load cell sensor (sometimes called a strain gauge) can convert up to 1 kg of pressure (force) into an electrical signal. Each load cell can measure the electrical resistance that changes depending on the strain (pressure, force, etc.) applied to the rod.
HX711 A / D There are 4 connecting wires that can be connected to the pressure sensor.
Easy to use with a drive voltage of 510V, and generates an output voltage according to changes in force. The
sensor is also easy to install. One end must be threaded through the screw hole and the other end must be fixed in a floating state. The label indicates the direction of gravity applied. Be especially careful and do not press white directly. The plastic cover part of the sensor to avoid damage.
