The NTC Thermistor Temperature Sensor Module is a low cost small module. Very sensitive to ambient temperature. It is typically used to sense the temperature of the environment.
- Using the NTC thermistor sensor, good sensitivity.
- The comparator output signal clean waveform is good, driving ability than 15mA.
- Adjust the temperature distribution bit detection threshold.
- Working voltage 3.3V-5V.
- The output format: Digital switching output (0 and 1).
- With bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
The NTC Thermistor Temperature Sensor Module is a low cost small module. Very sensitive to ambient temperature. It is typically used to sense the temperature of the environment. You can change the temperature detection threshold by adjusting the potentiometer. High and low values can be detected by connecting the
DO output directly to the microcontroller to detect temperature changes in the environment. The temperature detection range of the
module is 20-80 degrees Celsius. This module can be replaced with a line temperature sensor to control water temperature, water tank, etc.
In general, the 4-wire method of thermistor measurement is the most accurate. This is because there is virtually no current in either measurement cable line and no additional resistance flows through the cable line.
