The 5-channel flame sensor module is a 5-channel flame detector module used to detect flames over a wider range (> 120 degrees).
- Analog and digital outputs.
- On-board potentiometer and indicators.
- 1% resistors to make this module more reliable and precise.
- Can output the analog signal can be accurately measured, for high precision applications.
- Adjustable detection range digital output, analog output sensitivity adjustable design flexibility.
Specifications
- Operating Voltage(VDC): 3.3 to 9
- Detecting Range(): > 120
- Board Diameter (mm): 40
- Total Diameter (mm): 57
- Height (mm): 15
- Weight (gm) : 8
5Channel Flame Sensor Module is a 5 channel flame detector module used to detect flame in the larger area( >120 degrees). If you need a robot which should detect any fire around, then this module will be very useful for you. It detects the fire with 5 flame sensors which are arranged with 30 degrees.
This module outputs an analog signal, which would be more precise, and also digital signal which would be more easy to use, you can adjust the digital output sensitivity by the onboard potentiometer. The 5 LED indicators are helpful in your debugging, the highprecision resistors also make this sensor more precise than other flame sensors.
This module is sensitive to flames and radiation. It can also detect normal light sources in the wavelength range of 760 nm to 1100 nm. The larger the flame, the farther the distance test, so a simple flame test distance of 80 cm.
