This is a resistor that is sensitive to small forces. There is an active sensing area with a diameter of 0.16 (4 mm). This FSR changes its resistance depending on the pressure applied to the detection area. The stronger the force, the less resistance. When no pressure is applied to the FSR, its resistance exceeds 1M, and when fully pressed, the resistance is 2.5k.
Two pins extend from the bottom of the sensor at intervals of 0.1, making it pan-friendly.
These sensors are easy to set up and are great for detecting pressure, but they are not incredibly accurate. Use them to feel if they are squeezed, but sometimes you don't want to use them as a scale.
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
Features
- Easily customizable to a wide range of sizes
- Cost-effective
- Ultra-thin; 0.45 mm
- Robust; up to 10 million actuations
- Simple and easy to Integrate.
Specifications
| Actuation Force | 0.1 Newtons |
| Force Sensitivity Range | 0.1 10.02 Newtons |
| Non-Actuated Resistance | 10M W |
| Device Rise Time | <3 microseconds |
| Operating Temperature (C) | -30 to 60 |
| Clock Speed | 16 MHz |
| Flash Memory | 32 KB |
| Overall length | 4.5cm(45mm) |
| Overall width | 0.7cm(7mm) |
| Sensing area | 0.4cm(4mm) |
| |
