This MAX6675K type thermocouple sensor module measures a 1024 ° C temperature sensor and uses a Maxim MAX6675K thermocouple to digital converter IC to provide a microcontroller-compatible digital serial interface (SPI-compatible) for accuracy. Performs temperature compensation measurement.
Included K-provided type thermocouple sensor. It has a resolution of
12 bits and provides temperature measurements from 0 ° C to 1024 ° C (maximum temperature of the attached sensor is 450 ° C) with a resolution of 0.25 ° C.
Screw-on terminals allow you to connect to thermocouple spade connectors.
The standard 0.1-inch 5-pin header provides an interface to microcontrollers such as Arduino development boards. The thermocouple sensor included with the
is 4.5 mm in diameter and has 6 mm threaded mounting screws. The total length of the sensor including the cable and flat connector is about 100 cm.
Features of MAX6675 Module with K Type Thermocouple Sensor:
- Internal integrated cold junction compensation circuit;
- Temperature signal can be converted into 12-bit digital
- Embedded thermocouple break detection circuitry.
- K-type temperature probe
- Simple SPI serial output temperature.
- High impedance differential inputs.
- Thermocouple break detection.
- 2000V of ESD signal.
