1. IOT BASED SMART JACKET FOR WORKERS
smart iot clothing that has sensors embedded in it to securely transmit data to managers about hazardous conditions and the workers’ physical conditions, improving safety overall. and sends the miner health data and surrounding data such as temperature, hazardous gasses etc.
problem statement | requirement
The mining industry is known worldwide for its highly hazardous working conditions. Technological advances in extraction techniques to increase production have raised additional safety concerns in this industry. Previous studies in the safety field have found that the majority of accidents in this hazardous industry are caused by human error. India's coal production from April 2025 to October 2025 was 379.59 million tons (MT). Coal is the mainstay of India's energy sector. A study by the National Foundation of India found that millions of Indians are directly or indirectly dependent on the coal economy. It was highlighted that over 1.3 million Indians are employed in coal mining, transport, energy, sponge iron, steel and brick sectors. Miners face many dangers, from ventilation problems, flooding, gas explosions, roof collapse, mine transport, sudden collapses and mine flooding, spontaneous combustion to suboptimal evacuation routes. . There is no exact solution that can predict and avoid these risks before they occur, And for decades, mine operators have worked to prevent catastrophic accidents leading to the death, injury, or ill health of miners.
Objective:To provide a solution for the design of smart workwear with embedded sensors to securely transmit data on hazardous conditions and worker physical conditions to managers, thereby improving overall Improve safety. "
Solution | project idea
- Detecting all hazardous gas in mining area (methiane, butane, co2 level, oxygen level and in the case of abnormal environment sending alert
- Detecting the direct ecg of worker and sending the data to the iot application dashboard if any abnormal activity in the pulse got detected
- Measuring the body temperature of worker and temperature of surrounding and again sending the alert in abnormal conditions
- Emergency button for any hazardous situation such as land slide or water filling in mining area
- Local network protocol (child parent router and transceiver)
To solve this issue we have made a local network based iot wearable jacket for miners which has the embedded sensors in it so that if any problem occurs for the miner, the alert will be send to iot based application dashboard and data can be analyzed there. Our jacket will be able to monitor Pollution with pollution monitoring sensors such as mq2 sensor which helps in detecting the underground methane and butane gas, mq6 sensor for unknown CH4 or LPG gas detecting in the mining site area if any underground pipe get damaged and gas leakage. And mq9 sensor for detecting extensive carbon dioxide and mq135 sensor for detecting if the oxygen level is less than required.
Second sensor we are involving is ECG heart rate monitoring sensor, if the miner faces less oxygen or anxiety it directly flashes on ecg waves so if any abnormal changes in heart rates happen it will alert in the application.
Third most important sensor we are adding is the emergency button, if any sudden emergency happens like water filling or cave block due to land slide then one can send the alert with the special emergency button and help can be sent by the management team.
Fourth important feature we are adding is sending the temperature of the surrounding of the miner and body temperature of the mine worker himself.
Our system will work on local network connection where every device will connect to local wifi network and that parent router will connect to head office and miners jacket.
Components Used : esp32, jacket, mq2 sensor, mq6 sensor, ECG sensor, dht11 temperature sensor, lm35 body temperature sensor, power supply module.
Advantages :
Miners safety and health can be monitored and during any abnormal activity in the surrounding can be detected and if any health related symptom detected in the worker then also the alerts will be send to administration so that required action can be taken out.
2. School Water Monitoring System Using IOT
Iot system that can measure the water quality in the water tank of school so that the school management and administration can know the drinkability of water of school tank.
problem statement | requirement
As the clean and safe water supply is the backbone of a healthy economy, it is very underground in the india. More than 60 million peoples get infected by the waterborne disease in india every year
In india more than 10 million government schools and 15 million small schools providing the education in the cities and villages, and millions of students taking education from the premises, according to the survey in 2019 (https://www.unicef.org/india/what-we-do/clean-drinking-water), many schools have the water purification system in the ruine state and having impure water in the tanks, it is not possible to give an physical visit to schools every year by the government do to deal with this problem we are here to build the iot based system which monitors the water quality in the tank using the sensors modules and send the data to health ministry and school administration.
Objective: to provide the clean and drinkable water to the village students and government school students and making easily implementable ecosystem for measuring the water quality and provide to the government and school administration, as it is right to get the good food and drinkable water to the student, we are giving the little share by our idea.
All children have the right to clean water and basic sanitation, as enshrined in the Convention on the Rights of the Child. The ultimate goal of UNICEF's Water, Sanitation and Hygiene (WASH) work is to ensure that every child realizes this right and that no child is left behind.
Solution | project idea
Monitoring the ph level
Monitoring turbidity of water
TDS and Conductivity of water
Monitoring ph Level: we will connect the ph level sensor to the water tank and send the ph data to the iot dashboard. As same as that the turbidity, tds and conductivity of the water will also monitored, we also provide three level counter of drinkable, normal and bed quality graph ratio.
3. IOT BASED Cleaning of Solar panels with less water requirement
It automatically cleans the solar panel of dust and suppresses the generation of voltage due to foaming dust on the panel, but since cleaning takes a lot of water and time and effort, we proposed a system that requires less water for cleaning and can be monitored on phone via application.
problem statement | requirement
Solar energy uses photovoltaics (PV) or compressed solar panels (CSP) directly to convert heat from the sun into electricity. The most available energy source on earth is clean, green power. Solar energy is the future of power generation because it is renewable. Widely accepted all over the world. A lot of research is going on to harness the maximum power from the sun, but the main obstacles to using the maximum power are the accumulation of dust and air pollution on the solar panel, which reduces the energy consumption of the solar panel. Output drops 25% to 40% or more. Part of the globe showing a tropical country like India. The Indian government has set an ambitious goal of installing grid-connected solar projects with a capacity of 40 GW of a total renewable energy target of 175 GW over the next five years by 2025. Therefore, it is also our responsibility. Contribute to the achievement of national goals. This proposed paper describes the implementation of an intelligent cleaning system for solar panels, with a focus on utilizing Internet of Things (IoT) technologies. This enables dust monitoring, advanced analysis and system control, which tends to improve the overall efficiency of photovoltaic modules.
Solution | project idea
Cleaning the dust at the initial stage so that hard surface will not build over the panel so that less water be consumed
Automatic dust detection using the change in voltage generation
Data can be monitored over the application
Monitoring of how much water is used can also be visible on the application
4. A system of IoT devices to measure load weight in a dumper
Dumper overweighting is the biggest issue in the mining sector and other loading sectors due to some profit agencies overload the vehicle and leads to high damage or accident.
problem statement | requirement
In the mining sites the dealers overweight the dumper vehicle, also the transport trucks also gets overweight and it leads to heavy accidents due to little profit. To stop this we fit the load cell on the dumper to measure the weight of how much load is put over the dumper, after measuring the weight it will show if the weight is overload and send the alert to the responsible person on the iot dashboard. This can reduce the chances of accidents.
Solution | project idea
Measures the weight of load on the dumper
Tells if the weight is overweight and stops the engine of dumper
Sends the alert to responsible person
5. A system of IoT devices to measure load weight in a dumper
6. IoT Based vehicle cabin air quality measurement.
7. IOT BASED AI robotic trash boat to drive & harvest floating trash from urban drain
8. IOT BASED Alerts Early Warning System for Lightening and Heat Wave | warnings regarding the Heat Wave/Lightening strike to citizens
9. IOT Dashboard To Electronically detecting occupancy of beds in Hospitals
10. an iot application that can calculate SpO2, Blood Pressure, Stress or any other possible body vitals using a Smartphone. iot Applications that can help do screening for any conditions for people to take a decision to do a Dr consultation are also welcome.
11. IOT BASED Detection of Criminal Activities/Criminal through CCTV by analysing live footage for melee, mob formation, body language of suspect etc and alerting the owner on iot application
12. IOT BASED Cleaning of Solar panels with less water requirement
13. AI Based Application to identify & solve disease in plants/crops
14. IOT Device an application to monitor Humans health issues due to increased usage of pesticides in agriculture and unethical means adopted by food processing industries
15. Fishing boat Activity Clustering and Timeline Studying according to the weather using iot monitoring Application
16. smart line management system using iot
17. IOT Based Wheelchair Fall Detection
18. Underground Cable Fault Detector Project using iot
19. IOT Gas Pipe Leakage Detector Insect Robot
20. IOT Based Automatic Vehicle Accident Detection and Rescue System
21. IOT based Three Phase Power Failure Monitoring with GSM
22. Covid Patient Health Monitor using iot
23. IOT Social Distancing Monitoring Robot For Queue
24. Smart Parking System with iot application
25. IOT BASED Contactless Door Bell Ras Pi
